Permitted Engine Changes

6.14 This aspect of the regulations is covered by section “3” of the N4SKRA “Endurance Race Technical Regulations Book 2002” and thereon the Honda general Purpose Parts Catalogue. In the event of an in conclusive srutineering, MSW Ltd will refer to the N4SKRA and reserve the right to amend points at any time.

6.15 All fasteners on the engines may be drilled for the purpose of lock wiring.

6.16 Any team found to be using an engine using non-allowable modifications will be liable to loss of points for the race just completed and possibly for earlier rounds dependent on the nature of the offence.

6.17 Only one sprocket may be fitted to the rear axle for each engine. All chains or belts must be adequately protected at all times. Sprocket protectors may be used but not have additional teeth.

6.18 Wheels must be of metal, alloy or plastic construction in sizes suitable for the tyres specified. They may be of a one or two piece construction. Unless two securing bolts are fitted to the hubs on the rear axle, a circlip or similar must be fitted on each axle end to prevent accidental loss of the hub.

6.19 The type and construction of the seat is free, so long as it is mounted in the originally intended position, of sound and rigid construction and securely mounted.

6.20 The steering wheel type and size is free, but must be made of a material which will not constitute a danger in the event of an accident.

6.21 Special modifications will be permitted to allow use of hand controls to enable disabled drivers to compete.

6.22 TYRES

DRY - Bridgestone YDS may only be used.

WET - Bridgestone YDK may only be used.

NO OTHER MAKE OF DRY OR WET TYRE MAY BE USED

6.23 COMPUTER LAP SCORING

In the unlikely event of a computer malfunction or failure, the race will be red flagged and the race order will be taken as at the last fifteen minute print out.

6.24 All timing and lap scoring will be computerised based on small electronic transponders fixed to each kart. Any driver found attempting to interfere with such equipment will be excluded, along with their team.

6.25 Number plates to be yellow with black numbers must be fitted the Nassau panel and to the rear of the kart. Number plates and numbers are not supplied by the organisers, but can be purchased.